User Manual

Photon Access Manager
EpiValley
- 6 -
+
3) When the installation is completed, click ‘Finish’.
USB Driver Installation
After ‘Starting Installation’ stage, the Wireless Modem automatically change to the Modem instead of the CD Driver.
Then you will notice that the device driver s are bein g automatically installed at this stage (Notice th e System tray at
the bottom right of the screen) and once the installation process is completed “Your New hardware is installed and
ready to Use” will be displayed.
IMPORTANT NOTE
• DO NOT unplug the Wireless Modem during the USB driver installation.
• DO NOT move the Access Manager launched automatically during the USB driver installation.
• DO NOT restart the computer during the USB driver installation.
※ If the installation is not complete properbly, you need to have the re-install prcosss
for the Photon+ CM with USB driver. Please note the below article “3. Uninstalling Guide”.