User's Manual

CDMA 2000 1

WLL PHONE SXP-800/ 1900T

CDMA Fixed wireless Phone

8. Reference

8-3.Accessories

Standard Charger

This is a lightweight and durable ac charger.

To use the standard charger, plug it into a standard ac wall outlet and connect the lead from

the charger to the base of your phone.

Note: If the battery is completely empty, you cannot use the phone until it has enough charge

to operate in battery mode.

Please remember that product’s main source of operation power is from ac wall outlet power

source.

Data Cable

Easy and convenient connection to your PC or laptop computer for wireless

modem functionality.

Charging and Discharging

Your phone is powered by a rechargeable battery, and also a power adaptor.

Note that full performance of a new battery is achieved only after two or three complete

charge and discharge cycles! The battery can be charged and discharged hundreds of times

but it will eventually wear out. When the operating time (talk-time and standby time) is

noticeably shorter than normal, it is time to buy a new battery. Use only batteries approved by

the phone manufacturer and recharge your battery only with the chargers approved by the

manufacturer. Temperature extremes can affect the ability of your battery to charge. Battery

will not charge at temperatures above 140°F (60°C).

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from the devices listed on the following pages.

Warning! Use only batteries, chargers, and accessories approved by SIT for use with this

particular phone model. The use of any other types may invalidate any approval or warranty

applying to the phone and may be dangerous. For availability of approved accessories, please

check with your dealer. When you disconnect the power cord of any accessory, grasp and pull

the plug, not the cord.