User's Manual

CDMA 2000 1

WLL PHONE SXP-800/ 1900T

CDMA Fixed wireless Phone

4. Battery

Installing a Battery

The FWP is powered by a rechargeable Li-on battery. Use only Sungil approved battery.

1. Remove the battery cover gently.

2. Place the battery into the battery slot, making sure that the battery connector is securely

connected to the corner of the battery slot.

3. Place the Battery cover as shown.

Charging the Battery

The Battery is charged and powered by Li-on battery,and a travel adaptor comes with the original

package. Use only Sungil approved battery to ensure the quality,and it is always advised that phone

is connected to a permanent power source at all times. Please note that Battery is for Emergency.

1. With Battery in position on the phone, plug in FWP power adaptor to the back of the unit.

2. Plug your Power Adaptor to a standard AC Wall Outlet. When the battery is charged, it will have

power plug display on the right end. When power is plugged off,phone goes into a battery mode,

and remaining battery power will be shown on the same right top end of LCD display.

*Note: Do not remove the battery from the phone without unplugging the adapter while it is using

battery.When the battery is weak and only a few minutes of talk time remain, the battery sensor will let

you know by blinking the empty Battery Strength icon ( ). You will hear a warning tone and a

“Battery is low” message will be repeated at regular intervals on the display. When the battery

becomes too weak for the phone to operate in emergency, it will be switched off automatically.