SXP-2280 CDMA 1XRTT FIXED WIRELESS PHONE 800 MHz CDMA TECHNICAL MANUAL Copyright@2007 SungilTelecom Co.
Before installing your SXP-2280, carefully remove the contents from the shipping carton and check for evidence of shipping damage. If damage is found, contact your Authorized Sungil Distributor or shipping agent immediately. SAFE OPERATION INSTRUCTIONS IMPORTANT! Before installing or operating this product, read the SAFETY AND GENERAL INFORMATION section of this guide. 9 Install the unit indoors. 9 Install the unit on a hard, flat surface for proper ventilation.
1.1 ICCB Construction 1.2 Button Layout ICCB has 15 keys which are numeric keys(0-9), *, # , Recall , Redial and ICC key. Each key is used to make call but under specific menu internally, *, #, Redial, Recall and ICC key could be used as function key. 0-9 : Number Button *,#,Recall,Redial and ICC : Used at not only making call but also operation as follows, *: The Cancel / Previous key to cancel what a user did or go previous menu.
Redial: The down key for item selection on the menu. ICC: ICC stands for Indian Calling Card and this key has specific number for each region. This key is able to work only under “Insert Coin” status on LCD and don’t work at other status. 1.3 Coin Selector The below picture is shown coin selector structure. The specification of it is as follows. - Supports 1 Rs and 5 Rs. - Maximum two coins for 1Rs and 5Rs. Under maximum insertion like two 1Rs and two 5Rs, when a user inserts coin, it will be refunded.
initialize coin counter, a operator should go “Programming Mode” menu and make counter zero. 2. Menu Construction 2.1 Menu Tree Root Menu Sub Menu Description To enter to the programming mode (ICCB Mode) 1) Open the ICCB. 2) To enter to this menu, Please follow below instructions. On-Hook handset -> Press Programming mode button on the main board -> Off-Hook handset. 3) First menu, “1.Cash Record” will be displayed (ICCB Mode). Programming 1:Cumu.
8:S/W Version Tariff Password 9:Password To enter to the CDMA mode 1) Press the short keys follows “624709247*2690” 2) The message on LCD will be displayed “Enter Code ****”. 3) Enter your password “0000” ( It can be changed ) 4) First menu, “1.Setting” will be displayed. 1:Setting 1:Voice Privacy 2:DTMF Tone 3:Password CDMA Mode 4:AutoCall Time Menu 1:S/W Version 2:Version 2:H/W Version 3:PRL ID 1) To enter to Conversation Menu.
07. SLOT CYCLE INDEX 08. RC (Radio Configuration) For CDG2 Testing 09. SPC CHANG 10. SPC VALUE 01. Current NAM 02. Setup NAM You can selection the NAM1 or NAM2 02. NAM 1 03. NAM 2 01. MCC (Mobile Country Code) * 3 digit 02. MNC (Mobile Network Code) * 2 digit 03.MIN *10 digit 04.PHONE NO# (Directory Number) * 10 digit 05. ACCOLC (ACCess OverLoad Class) 01. Primary CH System A 06.PRIMARY CH. 02. Primary CH System B 01. Secondary CH System A 07.SECOND CH. 02. Secondary CH System B 08.
2.2 Short Key List Key Items Action Keys Description A-Key *75259#147*359# To enter A-Key. CDMA Mode Menu 624709247*2690 To enter to CDMA Menu. NAM Mode Menu 47*869#*75259# To enter to NAM Mode Menu. Set ICCB Password Program Whenever Shop keeper would forget ICCB to default value. push mode button times + 5 pressing Password, he can use it to make a password as default “3842” emergency button + '1036' Set CDMA Menu Password to default values.
2.3 ICCB User Mode Display ICCB User Mode (Normal Call) 1 Handset On-Hook TATA Indicom or MM/DD/YY hh:mm or According to Display Menu in CDMA Menu, you can change display type like the upper. Default is logo as “TATA Indicom”. INSERT COIN 2 Handset Off-Hook - This screen request for insertion coin to make call. But registered free call numbers are available. - During 45 secs, you didn’t anything. Some alarm will be occurred on handset. 3 After Insertion coin.
this time, whenever every 10 is remained, Alarm will be made one time and after then after 2 secs until call ends, Alarm will be made. - During alarm sound, If you would insert coin, Alarm sound will disappeared no more. - In case of local call, After current 60 secs would be used up, just inserted coin will be dropped to the box and new 60 secs will be displayed and you can keep talking without stoping.. - If you don’t insert coin at this time, Call will end and screen will go to “Insert Coin” screen.
12 Redial - in case of only IDLE state, Pressing Redial key can dialed last numbre which was made successfully. - In case of no history, nothing is happened. 2.4 ICCB User Mode Display for Emergency Call and Toll Free ICCB User Mode (Emergency Call) 1 Emergency button - If you press Emergency button, “Please Dial…” will be displayed in stead of “Insert Coin” message on LCD - Be used at Virtual calling card number and real emergency number like 100,101.
2.5 ICCB Menu ( Programming Mode) To enter to the ICCB Programming Mode 1) Open the Coin Box 2) To enter to this menu, Please follow below instructions. On-Hook handset -> Press Programming mode button on the board -> Off-Hook handset. 3) The message on LCD will be displayed “Enter Code ****”. 4) Enter your password “3842” ( it can be changed ) 5) First menu, “1.Local Prefix” will be displayed (ICCB Mode) Press '#': Saved and go back to the programming mode. Press ‘*’: Go back to the programming mode.
3:Cumu. Reset Press ‘3’, You can erase cumulative coin counter Press ‘#’ Del Cumu.Coins? Press ‘*’, Go back to the root menu. Press ‘#’,resetting the current coin counter. 4: Current Reset Press ‘4’, You can erase current coin counter. Press ‘#’ Del Cur.Coins? Press ‘*’, Go back to the root menu. Press ‘#’,resetting the current coin counter. 5: Daily Coins Press ‘5’, show to day total rupee with coin counts. Press ‘#’ Press ‘*’, Go back to the root menu.
Enter PWD XXXX Input No XXXXXXX Press ‘#’ Input sec XXX Press ‘*’ or ’#’ 2:View Tariff You can show Tariff Press ‘#’ 01:91 20s Press ‘Recall’, ‘Redial’ Press ‘*’ or ’#’ 5:ICC Number press free call number 1: Show Option Press ‘1’. Entering the Show Option menu. Press ‘#’ Press ‘Recall’, Move up to the next mode. Show Date&Time Press ‘Redial’, Move Down to the next mode. Press ‘Recall’, ‘Redial’ Show Blank Press ‘*’ or ’#’ Show Banner Show Date&Time Press ‘*’, Go back to the root menu.
Press ‘*’ or ‘#’ Press ‘#’, Updated the volume level. 2: Ringer Vol. Press ‘2’, Entering the volume of ringer menu Press ‘#’ Press ‘Recall’, Volume Up RingerVol. >>>> Press ‘Redial’. Volume Down Press ‘Recall’, ‘Redial’ Press ‘*’, Go back to the root menu. Press ‘*’ or ‘#’ Press ‘#’, Updated the volume level. 3: Speaker Vol. Press ‘3’, Entering the volume of speaker menu Press ‘#’ Press ‘Recall’, Volume Up SpeakerVol. >>>> Press ‘Redial’.
2.5 CDMA Mode Menu To enter to the CDMA mode 1) Press the short keys as follows “624709247*2690” 2) The message on LCD will be displayed “Enter Code ****”. 3) Enter your password “0000” ( It can be changed ) 4) First menu, “1.Setting” will be displayed. Menu Display Sub Menu Display Description 1: Voice Privacy Press ‘1’, Entering the Voice Privacy Menu. Press ‘#’ Press ‘Recall’, Changed the option to ‘Standard’ as follows V.P. V.P.
2: H/W Version Press ‘2’, Entering the H/W Version menu. Press ‘#’ Press ‘*’, Go back to the root menu. H/W:XXXXXXXXXX Press ‘*’ 3: PRL ID Press ‘3’, Entering the PRL ID menu. Press ‘#’ Press ‘*’, Go back to the root menu. PRL ID:XXXXXXXX Press ‘*’ 1: Debug Screen Press ‘1’, Entering the Debug Screen menu. Press ‘#’ You can enter the debug mode and you can show to the Debug Screen system information on CDMA network as follows. Press ‘#’ R 100 E 07 T 00 S 01243 N 00012 C 1011 PN 122 B 3.
4: Mirroring Press ‘4’, Entering the mirroring menu. Press ‘#’ Press ‘Recall’, Do mirroring Do Mirroring Press ‘Redial’, RestoreMirroring Press ‘Recall’, ‘Redial’ Press ‘#’, Updated the selected item. Press ‘*’ or ‘#’ Battery Backup Failure If you’re using the battery, the unit must be connected to AC power for at least 3 hours to fully charge the battery before it will provide back-up power to your SXP-2280.
Temperature Environment Operating Temperature: From -20°C to +60°C ; Up to 95% relative humidity (non-condensing). Storage Temperature: From -25°C to +75°C; Up to 95% relative humidity (non-condensing). Antenna Care and Replacement Do not use the SXP-2280 with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Have your antenna replaced by a qualified technician immediately. Use only a manufacturer-approved antenna.
Do not allow children to play with your SXP-2280 to prevent damage to the unit. Blasting Areas Construction crews often use remote control RF devices to activate off explosives. Therefore, to avoid interfering with blasting operations, turn your SXP-2280 OFF when in a "blasting area" or in areas posted: "Turn off two-way radio." FCC WARNING This equipment may generate or use radio frequency energy.
