User's Manual

2.5 ICCB Menu ( Programming Mode)
To enter to the ICCB Programming Mode
1) Open the Coin Box
2) To enter to this menu, Please follow below instructions.
On-Hook handset -> Press Programming mode button on the board -> Off-Hook handset.
3) The message on LCD will be displayed “Enter Code ****”.
4) Enter your password “3842” ( it can be changed )
5) First menu, “1.Local Prefix” will be displayed (ICCB Mode)
Press '#': Saved and go back to the programming mode.
Press ‘*’: Go back to the programming mode.
Menu Display Sub Menu Display Description
1:Cash Record 1: Cumu. Coins
Press ‘#’
Cumu.Tot 0000000
Press ‘Recall’ or
‘Redial’
Press ‘*’ or ‘#’
Press ‘1’, show to cumulative coins collected since
installation.
Press ‘Recall’, Menu Next Up as follows
Press ‘Redial’. Menu Next Down as follows
Cumu.Tot 0000000
Cumu.Use 0000000
Cumu.5Rs 0000000
Cumu.1Rs 0000000
Press ‘*’, Go back to the root menu.
Press ‘#’,Saved and go back to the root menu
2: Current Coins
Press ‘#’
Curr.Tot 00000
Press ‘Recall’ or
‘Redial’
Press ‘*’ or ‘#’
Press ‘2’, show to current coins collected in the cash
box.
Press ‘Recall’, Menu Next Up as follows
Press ‘Redial’. Menu Next Down as follows
Curr.Tot 00000
Curr.Use 00000
Curr.5Rs 00000
Curr.1Rs 00000
Press ‘*’, Go back to the root menu.
Press ‘#’,Saved and go back to the root menu
% It counts the collected coins upto 700, After it shows
BOXFULL.