User's Manual

CDMA FWT SXT-2180 4 Technical Manual
Basic Operation
Placing a Call
1) Pick up the handset and listen for a dial tone. 2) Dial the phone number.
Receiving a Call
When your telephone rings, pick up the handset and begin talking.
NOTE: If you hear an incoming call while picking up the handset, you can receive the call by hanging up (placing the
handset on the cradle) immediately. This will cause the phone to start ringing.
Ending a Call
Hang up the phone (place the handset onto the cradle).
Important Tones and Alerts
Normal Dial Tone - When cellular service is available, the receiver emits a standard (steady) dial tone.
No Service Tone - A fast beeping tone indicates that no cellular service is available. At that time, you can check the RSSI
status. The LED of RSSI will be blink with red color.
Outgoing Call Restriction - A slower beeping is an indication that calls may be received, but not made, from this
particular phone.
. Entering User MenuⅠ
- Pick up the handset
- Press Entry code : ‘##XX’ ( ‘XX’ is 2 digit code ) Now you entered User Menu.
Ex) ‘01’ – SIO ‘02’ – Emergency etc
- Select sub menu and input user data.
User Menu Table
01. Emergency
02. HOT Line
03. Mirroring
04. A Key
05. Mater Clear
0. Hidden Menu
06. Test Call
1. Ring Type
2. Volume
3. DTMF
4. 1Min Alert
1. Ring / Sound
5. Svc Alert
1. Caller ID 2.Tools
2. Dial Tone
1. Alarm
2. Auto Send Time
3. Flash Time
3. Time
4. On Hook Time
1. New Code
2. Outgoing Restrict
3. Reset Phone
4. Voice Privacy
4. Activating
5. Auto Gain Control