User's Manual

SXT-800U User Quick Manual 12/15
Ⅶ. Data Mode Menu
- “TX” means “Transmitting” , “RX” means “Receiving”
Voice call mode ‘##51’
- You can set a terminal mode to voice mode.
- Press À to make completed
- Or press ‘#’ to cancel what you did.
Ex)
##51 + À : Set a terminal mode to voice mode.
FAX Rx mode(use FAX Module) ‘##52’
- Only In case that a terminal has a fax module currently, This command can affect the
terminal..
- You can choose one of two behaviors in FAX RX mode.
< FAX RX mode >
À
FAX RX mode will be set always until a user change other mode.
We call this as FAX RX always mode for making it easy to say.
‘#’
FAX RX mode will be change voice mode after a terminal receive FAX once. We
call this as FAX RX once mode for making it easy to say..
Ex)
##52 + À : FAX RX always mode will be on
##52 + # : FAX RX once mode will be on
ASYNC Data Rx mode (use Data Module) ‘##53’
- Only In case that a terminal has a module currently, This command can affect the terminal..
- You can choose one of two behaviors in ASYNC Data RX mode
< ASYNC Data receiving mode >
À
ASYNC Data RX mode will be set always until a user change other mode.
We call this as ASYNC Data RX always mode for making it easy to say
‘#’
ASYNC Data RX mode will be change voice mode after a terminal receive ASYNC
Data once. We call this as ASYNC Data RX once mode for making it easy to say.
Ex)
##53 + À : ASYNC Data RX always mode will be on
##53 + # : ASYNC Data RX once mode will be on