User's Manual

SXT-800U User Quick Manual 14/15
FAX TX Mode(use Fax Module) ‘##56’
- “TX” means “Transmit”
- Only In case that a terminal has a fax module currently, This command can affect the
terminal..
- After setting this, You can send a fax data through a FAX machine wihout prefix dialing
always.
- You can set and cancel this mode as a following table.
< FAX TX Mode >
À
FAX TX mode will be set
‘#’
FAX TX mode will be canceled. A terminal mode will be back to a previous
mode.
Note: Without setting this, a user is able to send a FAX with Fax machine always with
prefix dial number,
#0À, when you dial a specific number for a fax. After a sending
fax, a terminal will be back to a previous mode. a example is here.
Ex) Suppose you want to send a fax data to 12345678.
Dial on a FAX : #0À12345678
ASYNC Data Tx Mode (use Data Module) ‘##57’
- Only In case that a terminal has a fax module currently, This command can affect the
terminal.
- You can set and cancel this mode as a following table.
<ASYNC Data Tx mode>
À
ASYNC Data Tx mode will be set
‘#’
ASYNC Data Tx mode will be canceled.
A terminal mode will be back to a previous mode.
Note: Without setting this, a user is able to send a Async data always with prefix dial
number,
#8À, when you dial a specific number for a Async data. After a sending
Async data, a terminal will be back to a previous mode. a example is here.
Ex) Suppose you want to send a async data to 12345678.
Dial on PC or POS equipment: #8À12345678