User's Manual

SXT-800U User Quick Manual 2/15
Ⅰ. How to enter commands.
- Pick up the handset on your pots.
- Press Entry code : ‘##XX’ ( ‘XX’ is 2 digit code )
: Prefix code, “##”, makes a terminal ready to receive commands. A following two digits
are command.
- Actually, Each commands are a sequence digits to get to a specific function like as a
following menu structure.
Ex)
‘01’ – SIO : You just choosed Menu ‘0’ and Submenu Menu ‘1’ linked to SIO.
‘02’ – Emergency : You just choosed Menu ‘0’ and Submenu Menu ‘2’ linked
Emergency menu.
Note : Whenever you set the values of a Emergency, a hotline, a mirroring, a new code, a
outgoing restrict, a reset phone, a voice privacy, A lockcode prompt sound which
requests you to enter a lock code will be heard immediately.
Ex) ##03 Æ lockcode prompt sound Æ lock code Æ you can set Emergency number
Note : a FWT will go to idle state automatically when a user choose wrongly a parameter
or a function in a menu linked a command..
Menu Structure
1. SIO
2. Emergency
3. HOT Line
4. Mirroring ( will be used it in a factory )
5. A Key
6. Mater Clear ( will be used it in a factory )
0. Hidden Menu
7. Test Call ( will be used it in a Lab )
1. Ring Type
2. Volume
3. DTMF
4. 1Min Alert
1. Ring / Sound
5. Svc Alert
1. Caller ID
2. Dial Tone
2.Tools
3. TTY Mode
1. Alarm
2. Auto Send Time
3. Time
3. Flash Time