User's Manual

SXT-800U User Quick Manual 5/15
A Key ‘##05’
- In the A Key menu, you can set 26 digits A Key on FWT..
- A short go-ahead tone follows a entering a command of “##05”.
- Input A Key of 26 digits .
- Pressing À will store A Key safely on FWT’s memory..
- If the entered A key is valid, you can hear confirmation tone. Otherwise, you can not..
Ex)
##05 Î 26 digits (20 digits + 6 digits checksum) Î À
Master Clear ( will be used in a factory ) ‘##06’ + [ DS Baud Rate ]
- Before packing just a made product, In a factory, a phone has to makes changed value for
testing to a default values . At this time, this commands make a FWT has default values
predifined by a operator. a command of À or ‘#’ has to follow “##06” for proper DS rate for
your system configuration. This option is needed due to FAX usually supports 19,200 rate.
- After done, the Terminal will be reset.
<Master Clear Mode>
À
Master clear to 115,200 DS Mode
‘#’ Master clear to 19,200 DS Mode for a FAX
Ex)
##06 + À : Master clear with 115,200 option
##06 + ‘#’ : Master clear with 19,200 option
Test Call ( will be used in a lab like CDG2 ) ‘##07’ + [Option]
Pressing À needs for make completed.
[Option]
1 NEW 8K MARKOV 6 FULL TDSO
2 NEW 13K MARKOV 7 SO54 MARKOV
3 8K LOOP BACK 8 SO55 LOOP BACK
4 13K LOOP BACK 9 SORS2 MARKOV
5 SIMPLE TDSO 0 SORS2 MARKOV
Ex) ##07+1+ À : Test a call for New 8K MARKOV