Specifications

Important Safety Features
1) Read these instructions.
2) Keep these instructions
3) Heed all warnings.
4) Follow the instructions.
5) Don not use this apparatus near
water.
6) Clean only with a dry cloth.
7) Do not block any ventilation open-
ings. Install in accordance with the
manufacturer's instructions.
8) Don not install near any heat
sources such as radiators, heat
registers, stoves, or other appara-
tus that produce heat.
9) Do not defeat the safety purpose
of the grounding type plug. A
grounding type plug has two
blades and a third grounding
prong and is used for your safety.
10) Protect the power cable from be-
ing walked on or pinched particu-
larly at the plugs or at the point
where they exit the device.
11) Unplug this apparatus during light-
ning storms or when unused for
long periods of time.
12) Refer servicing to all qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as the power cable has been
damaged or liquid has been
spilled or objects have fallen into
the apparatus or the apparatus
has been exposed to rain or mois-
ture, does not operate normally or
has been dropped.
13) Damage requiring service: Un-
plug the apparatus from the wall
outlet and refer servicing to quali-
fied service personnel under the
following conditions.
a) When the power supply cord
has been damaged.
b) If liquid has been spilled, or
objects have fallen into the
apparatus.
c) If the apparatus has been
exposed to rain or moisture.
d) If the apparatus does not
operate normally by following
the operating instructions.
Adjust only those controls
that are covered by the oper-
ating instructions as an im-
proper adjustment of other
controls may result in dam-
age and will often require
extensive work by a qualified
technician to restore the ap-
paratus to its normal opera-
tion.
e) If the apparatus has been
dropped or damaged.
14) When the apparatus exhibits a
distinct change in performance
this indicates a need for service.
15) Object and Liquid entry: Never
push any foreign objects of any
kind into the openings as they
may touch dangerous voltage
points that could result in fire or
electric shock. The apparatus
shall not be exposed to dripping
or splashing and no objects filled
with liquids such as a beverage
Unpacking your unit
IMPORTANT NOTE: Your Epifani product was originally packaged in a specially
designed carton and included special packing materials. Please save these
items. They should be used when shipping your Epifani product.
Please inspect the shipping carton - If the packaging seems damaged please
return this item to the shipper.
4
Rear Panel Operation
The rear panel of your Epifani amp has several useful features that, when used
properly, will enhance the overall experience with your amp.
1. Tuner out - Plug an instrument cable between this jack and your digital
tuner. You can use the Mute Switch on the front panel to access the quiet
tuning mode. Tuning quietly makes everyone around you happy and being
in tune will help advance your career!
2. Effect Send/Return - Using shielded instrument cables connect the "Effect
send" to your effect's input. Connect the output of your effect to the UL Amp
Series "Effects Input". Using the Serial/Parallel switch you can choose run
your effects "in line" with the dry signal or "along side" of the dry signal.
Typically a reverb would be run in parallel and a chorus or flanger would be
run in series. To practice along with pre-recorded music you could take the
output of a tape player, CD player or MP3 player and plug it into the effect
return jack.
3. Pre-amp out - Using a shielded instrument type cable this output could be
used to send a signal to a power amp or to send an unbalanced signal to a
recording device.
4. Direct Out - Using a "microphone" cable with XLR connectors you can send
a balanced signal to the house PA or for direct injection into a recording de-
vice.
5. Direct Out Level - You can control the volume of the Direct Out jack for the
cleanest possible feed to an external device.
6. Pre/Post switch - By placing the switch in the "pre" position you are essen-
tially sending an unenhanced or "flat" signal out of the Direct Out. In the
"post" position the Direct Out is outputting the EQ settings you have cho-
sen.
9