the future has been drawn
The UL 3 cabinets Thank you and congratulations on your purchase of a new UL3 cabinet. Epifani is based in Brooklyn, New York, with design and manufacturing in America. We design innovative products that inspire musicians of all skills and styles to challenge their creative boundaries. Our oldworld craftsmanship and innovative design has changed the world of bass amplifiers and cabinets by combining highly accurate sound, thundering low-end response and lowered weight.
Important safety Information 1. Read, follow and keep these instructions for the life of the product. 2. Do not use this apparatus near water. 3. Clean only with a dry cloth. 4. Do not block any ventilation openings. Install in accordance with all applicable manufacturer's instructions. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. 6. Do not defeat the safety purpose of the grounding type plug.
UL 3 cabs Controls & features R e a r Pa n e l Note: Some UL3 cabinet rear panel connectors may be different from what is shown here. If any questions, call your dealer or Epifani directly. 1. Tweeter Level control – Adjusts the amount of high frequency sound coming from the tweeter. 2. Speaker Input/Output connectors – Connect your amplifier to the speaker cabinet using a Speakon or 1/4” ‘phone’ or ‘TS’ terminated cable.
UL 3 Cabinet Tips & troubleshooting UL3 cabinets are equipped with Combo Neutrik Connectors. This means that you can use a Speakon connector or a ¼” connector. How? In the center of the Speakon connector you’ll find ¼” hole to insert a ¼” jack. For higher-power handling and more secure connections, use Speakon-to-Speakon cables with a speaker wire of at least 16-gauge. A lower gauge number means thicker cabling, so a 14-gauge cable is thicker in diameter and thus better than a 16gauge cable.
UL 3 Specifications UL 3 - 410 CONFIGURATION IMPEDANCE POWER RATING SPECS HARDWARE DIMENSIONS WEIGHT 4 x 10" 200-watt Epifani ceramic drivers 1" compression tweeter with adjustable control 8-ohms 800-watts RMS, 1200-watt peak Response 36Hz - 16kHz Sensitivity 102dB (1W@1m) 2x Speakon + output connectors Lite Ply poplar plywood, with dado joint construction and hard spray finish Steel recessed handles and an 18-gauge steel grill 26.75"h x 23.25"w x 17.875"d 72 lbs.
UL 3 Specifications UL 3 - 112 and 112 D.I.S.T.
the future has been drawn
