User Guide Epiphan LUMiO 12x May 10, 2016 UG110-03
Terms and conditions This document, the Epiphan web site, and the information contained therein, including but not limited to the text, videos and images as well as Epiphan System Inc.’s trademarks, trade names and logos are the property of Epiphan Systems Inc. and its affiliates and licensors, and are protected from unauthorized copying and dissemination by Canadian copyright law, United States copyright law, trademark law, international conventions and other intellectual property laws.
Thank you for choosing Epiphan! At Epiphan Video (“Epiphan”), product function and quality are our top priority. We make every effort to make sure that our products exceed your expectations. Product feedback Your feedback is important! We regularly contact our customers to ensure our products meet your performance and reliability requirements. We strive to continually enhance our products to accommodate your needs.
Table of contents Table of contents Getting started Quickstart What is LUMiO 12x? 4 6 7 10 What's in the box? 11 Front, back and bottom views 13 Technical specifications 16 LUMiO 12x setup 18 Positioning and connecting your LUMiO 12x 19 Setting up your remote control 20 Operation The remote control 21 22 Setting up your remote control 24 Understanding the remote control buttons 25 Operation basics 28 Controlling pan, tilt and zoom settings 29 Setting and applying presets 30 Clear
Software and documentation license 62 5
LUMiO 12x User Guide Getting started Getting started Welcome and thank you for buying Epiphan Video’s LUMiO 12x! This user guide contains all the information necessary to successfully set up and operate your LUMiO 12x PTZ camera. This guide helps you get started by providing identification and descriptions of your LUMiO 12x's physical features and included hardware following by a detailed breakdown of your LUMiO 12x's technical specifications.
LUMiO 12x User Guide Quickstart Quickstart This sections helps you get started with your LUMiO 12x. You'll learn how to position/connect your LUMiO 12x and set up and operate your remote control.
LUMiO 12x User Guide Quickstart Next you'll learn how to use the remote control to operate your LUMiO 12x. Setting up your remote control Your remote control allows you to control your LUMiO 12x movements and settings but requires a bit of initial configuration before it's ready for use. To set up your remote control: 1. Ensure your LUMiO 12x is connected to the power supply and that the rear indicator light is a solid red (see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Quickstart To control your LUMiO 12x with the remote control: 1. Ensure that your LUMiO 12x is powered on (the front indicator light should be solid blue – see Front, back and bottom views for exact location of indicator lights). 2. Press the CAM 1 button you mapped to your LUMiO 12x in Setting up your remote control. 3.
LUMiO 12x User Guide What is LUMiO 12x? What is LUMiO 12x? LUMiO 12x is a portable and versatile HD pan-tilt-zoom (PTZ) camera that can be placed comfortably on a flat surface, secured on a wall, ceiling or mounted on a tripod. LUMiO 12x captures crystal-clear HD video at 60 fps and outputs in DVI-I, HDMI and 3G-SDI video formats. LUMiO 12x captures the finest of details with its 12x optical zoom capability and offers true video capture flexibility with its 72.5° wide angle view and 6.3° zoom angle view.
LUMiO 12x User Guide What's in the box? What's in the box? Within the box you'll find the following items: 1. Your LUMiO 12x video camera 2. One infrared (IR) remote control (requires 2 AAA batteries sold separately) 3. One power supply cable (the exact cable you receive depends on your region) 4. One DC12V power adapter 5. VISCA RS-232 cable 6. Lens cap 7.
LUMiO 12x User Guide Name What's in the box? Image Description DC12V power Connects to your power cable to convert electrical supply energy and supply power to your LUMiO 12x. VISCA RS-232 cable Lens cap Connects your computer to your LUMiO 12x to allow issuing commands via serial port. Rubber cap that covers and protects your LUMiO 12x's lens when not in use.
LUMiO 12x User Guide Front, back and bottom views Front, back and bottom views In the front, your LUMiO 12x has its camera lens, the camera base, the IR receiver panel and the power indicator light. The rear panel features a series of output ports and a power input port, and the bottom of your LUMiO 12x has a dial switch and a few mounting installation holes. See below for a complete list of LUMiO 12x's physical features.
LUMiO 12x User Guide Front, back and bottom views Table 3 LUMiO 12x back view descriptions Label Name Description VISCA IN/OUT (RS-232) RS-232 serial port connections. Allows issuing of RS-232 commands ports using VISCA/PELCO-D/PELCO-P protocols. 6 CVBS output port Not supported. 7 3G-SDI output port 5 8 DVI-I (HDMI) output port 9 12V DC power input port 10 Power indicator light Outputs SDI video signals from LUMiO 12x (3G-SDI cable not included with purchase).
LUMiO 12x User Guide Front, back and bottom views Table 4 LUMiO 12x bottom view descriptions Label Name Description Lightly adheres to most flat surfaces to ensure your LUMiO 12x stays 11 Rubber pads (x4) 12 DIP switch Unused. 13 Tripod mount hole Connects to a tripod's screw. 14 Additional mount holes Connection points for tripod alignment pins. in place.
LUMiO 12x User Guide Technical specifications Technical specifications Technical specifications for LUMiO 12x are included in the table below. Model TLC-300-S Series Sensor 1/2.3-inch high-quality 12MP HD CMOS sensor Output ports DVI-I (HDMI™), 3G-SDI Output resolutions 720p, 1080p, 720i, 1080i Output frame rates 25, 29.97, 50, 59.94 Optical zoom 12x Digital zoom 2x View angle 6.3° (zoom) and 72.
LUMiO 12x User Guide Electronic shutter Back light compensation (BLC) Input voltage Dimensions (height x width x depth) Technical specifications Auto/Manual Auto/Manual DC 12V 173 mm × 220 mm × 117 mm (6.8 in. × 8.66 in. × 4.6 in.) Net weight 1.
LUMiO 12x User Guide LUMiO 12x setup LUMiO 12x setup Your LUMiO 12x comes fully assembled and is ready to connect to your capture appliance right out of the box. Setup involves preparing your new LUMiO 12x to transmit video signals, which includes physical positioning and connecting the power supply/video output cables to your capture appliance. The remote control also requires some initial configuration to pair to your LUMiO 12x.
LUMiO 12x User Guide Positioning and connecting your LUMiO 12x Positioning and connecting your LUMiO 12x Positioning and connecting your LUMiO 12x is a simple process that involves physically placing your LUMiO 12x for the best view and connecting the required output cables to transfer video output to your capture appliance. To position and connect your LUMiO 12x 1. Place your LUMiO 12x in the desired location (i.e. on a flat surface, a tripod or mounted to a wall). 2.
LUMiO 12x User Guide Setting up your remote control Setting up your remote control Your remote control requires a bit of initial configuration before it can be used to control your LUMiO 12x. To set up your remote control: 1. Ensure your LUMiO 12x is connected to the power supply and that the rear indicator light is a solid red (see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Operation Operation Basic operation of your LUMiO 12x involves adjusting its pan (horizontal direction), tilt (vertical direction), zoom and focus settings. More advanced operation includes customizing exposure and color appearance parameters, such as brightness or contrast, and setting specific video output formats at particular resolutions and frame rates.
LUMiO 12x User Guide The remote control The remote control Your LUMiO 12x purchase includes an infrared (IR) remote control (powered by 2 AAA batteries sold separately) that allows you to control your LUMiO 12x from a distance.
LUMiO 12x User Guide The remote control 23
LUMiO 12x User Guide Setting up your remote control Setting up your remote control Your remote control requires a bit of initial configuration before it can be used to control your LUMiO 12x. To set up your remote control: 1. Ensure your LUMiO 12x is connected to the power supply and that the rear indicator light is a solid red (see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Understanding the remote control buttons Understanding the remote control buttons The remote control has many buttons that allow you to operate your LUMiO 12x. The table below describes in detail the function of each button on the controller. Table 5 Description of the remote control buttons Button(s) Function(s) POWER: Turns the LUMiO 12x on or off. FREEZE: Unused. IRT: Not currently supported. SET1-SET4: Maps the camera to CAM1, CAM2, CAM3, or CAM4.
LUMiO 12x User Guide Button(s) Understanding the remote control buttons Function(s) LEARN: Not currently supported. Pan (left/right arrows): Press and hold to move your LUMiO 12x’s lens left or right. Only usable if Manual Focus is enabled (see below). Tilt (up/down arrows): Press and hold to move your LUMiO 12x’s lens up or down. FOCUS (+ and - buttons): Increases or decreases the focus distance on your LUMiO 12x. ZOOM (+ or -): Increases or decreases the zoom on your LUMiO 12x.
LUMiO 12x User Guide Button(s) Understanding the remote control buttons Function(s) BRIGHT +/BRIGHT -: Increases or decreases video brightness (BLC must be enabled). Video output options: Changes your LUMiO 12x's output resolution and frame rate. See Setting video output resolution and frame rate to learn how to configure your LUMiO 12x's output signal.
LUMiO 12x User Guide Operation basics Operation basics Your remote control allows you to issue basic control commands, such as pan, tilt and zoom adjustments to your LUMiO 12x along with more advanced setting customizations such as preset configuration and output signal settings.
LUMiO 12x User Guide Controlling pan, tilt and zoom settings Controlling pan, tilt and zoom settings Your remote control allows you to issue basic control commands, such as pan, tilt and zoom adjustments to your LUMiO 12x. To control the pan, tilt and zoom settings of your LUMiO 12x with the remote control: 1. Ensure that your LUMiO 12x is powered on (the front indicator light should be solid blue – see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Setting and applying presets Setting and applying presets Your remote control lets you save commonly used setting configurations to specific presets that can be applied using the number keys. To set a preset (to number key "1", for example): 1. Ensure that your LUMiO 12x is powered on (the front indicator light should be solid blue – see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Clearing presets Clearing presets Clearing a preset erases all LUMiO 12x settings saved to the specified preset on your remote control. You can clear all presets saved to your remote control at the same time, or you can clear presets individually. To clear a specific preset ("1", for example): 1. Ensure that your LUMiO 12x is powered on (the front indicator light should be solid blue – see Front, back and bottom views for exact location of indicator lights). 2.
LUMiO 12x User Guide Setting video output resolution and frame rate Setting video output resolution and frame rate You can change your LUMiO 12x's output signal resolution and frame rate using the blue buttons located at the very bottom of your remote control.
LUMiO 12x User Guide The OSD menu The OSD menu The on screen display (OSD) menu is a control panel overlay that is accessed using the remote control. The OSD menu appears in your capture application's video display and allows you to make changes to your LUMiO 12x's settings using the remote control's navigation arrow keys.
LUMiO 12x User Guide Accessing the OSD menu Accessing the OSD menu Use your remote control to access your LUMiO 12x's OSD menu. Ensure that your LUMiO 12x is turned on and that its video content is shown on your capture computer's display (via a capture application). To access the OSD menu: 1. Point the remote control at your LUMiO 12x. 2. Select your desired LUMiO 12x using the CAM1-4 buttons. 3. Press the MENU button on your remote control; the OSD menu appears on your capture display.
LUMiO 12x User Guide Navigating the OSD menu Navigating the OSD menu The remote control is used to move through your LUMiO 12x's OSD menu. Point the remote control at your LUMiO 12x and use the buttons described in the table below to navigate through the OSD menu and make changes to your settings. Table 6 OSD menu navigation buttons OSD menu navigation (using remote control) Button(s) Up/down navigation keys Function Cycle through OSD menu headings. 1. Descend into selected submenu.
LUMiO 12x User Guide Understanding OSD menu settings Understanding OSD menu settings The OSD menu contains a variety of options to allow you to change settings on your LUMiO 12x. Table 7 OSD menu setting list Main menus Submenus Setting options PROTOCOL VISCA, PELCO-D, PELCO-P ADDRESS (sets your camera's address for RS-232 VISCA: 1-7, PELCO D/P: 1-255 communication) BAUD RATE PTL LOCK SYSTEM (protocol lock) 2400, 4800, 9600, 115200 ON/OFF. Locks/unlocks the PROTOCOL setting. RS-485 ON/OFF.
LUMiO 12x User Guide Main menus Understanding OSD menu settings Submenus Setting options EXPOSURE MODE AUTO, MANUAL or BRIGHT SHUTTER (shutter speed in seconds) IRIS 1/8–1/10000 s (only available if EXPOSURE MODE set to MANUAL) CLOSE–F1.
LUMiO 12x User Guide Main menus Understanding OSD menu settings Submenus 3D NR (3D noise reduction) Setting options 0~3; the bigger value, the less motion noise on image SHARPNESS 0~4 CONTRAST 0~6 SATURATION Set color saturation level PRECISE: Camera pans/tilts in small degrees with incremental TRACK MODE motion FLUENT: Camera pans/tilts smoothly with unrestricted motion PWR ACT (action OFF (no action, just power on normally), PRE1 (preset 1), PRE2 upon power-on) (preset 2) SPEEDBYZ (speed
LUMiO 12x User Guide Main menus Understanding OSD menu settings Submenus Setting options 29.97 frames per second. 1080P 25 720P 59.94 720P 50 Sets the video output to 1080P (progressive) resolution at 25 frames per second. Sets the video output to 720P (progressive) resolution at 59.94 frames per second. Sets the video output to 720P (progressive) resolution at 50 frames per second. SYS RESET System reset. CAM RESET Camera reset. PT RESET Pan/tilt reset.
LUMiO 12x User Guide RS-232 serial port communication RS-232 serial port communication Your LUMiO 12x offers support for RS-232 communication to allow remote operation of your LUMiO 12x.
LUMiO 12x User Guide VISCA protocol command list VISCA protocol command list VISCA protocol commands are used to control your LUMiO 12x, retrieve information on camera settings and get information on command send status. VISCA commands are separated into: l Return commands l Control commands l Inquiry commands l Camera pan/tilt, zoom and exposure values Return commands VISCA return commands let you know if a given command is accepted, executed or if there is an error in the command itself.
LUMiO 12x User Guide VISCA protocol command list Error messages Command Description Note Packet Returned when a command cannot be executed due to Command Not z0 61 41 FF Executable current conditions. For example, when commands controlling the focus manually are received during auto focus. Control commands VISCA control commands allow you to customize your LUMiO 12x settings and issue movement commands.
LUMiO 12x User Guide Command CAM_Focus CAM_ ZoomFocus CAM_WB VISCA protocol command list Function Command Packet Stop 8x 01 04 08 00 FF Far(Standard) 8x 01 04 08 02 FF Near(Standard) 8x 01 04 08 03 FF Direct 8x 01 04 48 0p 0q 0r 0s FF One Push AF 8x 01 04 18 01 FF Direct pqrs: Zoom Position (0(wide)~ 0u 0v 0w FF 0x4000(tele)) tuvw: Focus Position 8x 01 04 35 00 FF Indoor 8x 01 04 35 01 FF Outdoor 8x 01 04 35 02 FF OnePush 8x 01 04 35 03 FF Manual 8x 01 04 35 05 FF Outdoor Auto
LUMiO 12x User Guide Command CAM_AE VISCA protocol command list Function Command Packet Note Full Auto 8x 01 04 39 00 FF Automatic Exposure mode Manual 8x 01 04 39 03 FF Manual Control mode Bright 8x 01 04 39 0D FF Bright mode(Manual control) Reset 8x 01 04 0A 00 FF Shutter Setting Up 8x 01 04 0A 02 FF Down 8x 01 04 0A 03 FF Direct 8x 01 04 4A 00 00 0p 0q FF pq: Shutter Position (0~0x15) Reset 8x 01 04 0B 00 FF Iris Setting Up 8x 01 04 0B 02 FF Down 8x 01 04 0B 03 FF Direct
LUMiO 12x User Guide Command VISCA protocol command list Function Command Packet Note On 8x 01 04 3E 02 FF Exposure Compensation ON/OFF Off 8x 01 04 3E 03 FF Reset 8x 01 04 0E 00 FF Up 8x 01 04 0E 02 FF Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position (0~0x0E) On 8x 01 04 33 02 FF BackLight On Off 8x 01 04 33 03 FF BackLight Off Reset 8x 01 04 02 00 FF Aperture Control Up 8x 01 04 02 02 FF Down 8x 01 04 02 03 FF Direct 8x 01 04 42 00 00 0p 0q FF
LUMiO 12x User Guide Command VISCA protocol command list Function Command Packet Note Direct 8x 01 04 54 0p FF (0~0x03) 50HZ 81 01 04 23 01 FF 60HZ 81 01 04 23 02 FF Freeze On 81 01 04 62 02 FF Freeze On Immediately Freeze Off 81 01 04 62 03 FF Freeze Off Immediately Preset Freeze On 81 01 04 62 22 FF Freeze On When Running Preset 81 01 04 62 23 FF Freeze Off When Running Preset Noise reduction CAM_3D Noise reduction FLICK Freeze Preset Freeze Off pp: 0~18 Video format 0:1080P60
LUMiO 12x User Guide Command VISCA protocol command list Function Command Packet Note Menu On 8x 01 06 06 02 FF Turn on the menu Menu Off 8x 01 06 06 03 FF Turn off the menu Menu Back 8x 01 06 06 10 FF Menu step back Menu Ok 8x 01 7E 01 02 00 01 FF Menu ok SYS_Menu Receive IR (remote commander) Transfer On 8x 01 06 1A 02 FF IR_Transfer IR_Receive CODE from VISCA communication ON/OFF Transfer Off 8x 01 06 1A 03 FF On 8x 01 06 08 02 FF Off 8x 01 06 08 03 FF On/Off 8x 01 06 08 10
LUMiO 12x User Guide Command VISCA protocol command list Function AbsolutePosition RelativePosition Command Packet Note 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF 8x 01 06 03 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF Home 8x 01 06 04 FF Reset 8x 01 06 05 FF 8x 01 06 07 00 0W W:1 UpRight 0:DownLeft 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF YYYY: Pan Limit Position(TBD) Set Pan-tiltLimitSet 8x 01 06 07 01 0W Clear 07 0F 0F 0F 07 0F 0F 0F FF ZZZZ: Tilt Limit Position(TBD) Inquiry commands VISCA inquiry commands
LUMiO 12x User Guide Command CAM_WBModeInq VISCA protocol command list Command Packet Return Packet Note y0 50 00 FF Auto y0 50 01 FF Indoor mode y0 50 02 FF Outdoor mode y0 50 03 FF OnePush mode y0 50 04 FF ATW y0 50 05 FF Manual 8x 09 04 35 FF CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: R Gain CAM_BGainInq 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: B Gain CAM_AEModeInq 8x 09 04 39 FF y0 50 00 FF Full Auto y0 50 03 FF Manual y0 50 0A FF Shutter priority y0 50 0B FF
LUMiO 12x User Guide Command SYS_MenuModeInq CAM_LR_ReverseInq CAM_PictureFlipInq VISCA protocol command list Command Packet Return Packet Note y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF On y0 50 03 FF Off y0 50 0p 0q 0r 0s FF pqrs: Camera ID 8x 09 06 06 FF 8x 09 04 61 FF 8x 09 04 66 FF CAM_IDInq 8x 09 04 22 FF CAM_VersionInq 8x 09 00 02 FF y0 50 ab cd mn pq rs tu vw FF pp: 0~18 Video format 0:1080P60 1:1080P50 2:1080I60 3:1080I50 4:1080P30 5:1080
LUMiO 12x User Guide Command VISCA protocol command list Command Packet Return Packet Note 18:640*480@30HZ(USB OUTPUT) IR_Transfer IR_Receive y0 50 02 FF On y0 50 03 FF Off y0 50 02 FF On y0 50 03 FF Off 8x 09 06 1A FF 8x 09 06 08 FF y0 07 7D 01 04 00 FF y0 07 7D 01 04 07 FF y0 07 7D 01 04 38 FF Power ON/OFF Zoom tele/wide AF On/Off IR_ReceiveReturn y0 07 7D 01 04 33 FF y0 07 7D 01 04 3F FF y0 07 7D 01 06 01 FF CAM_Backlight CAM_Memory Pan_tiltDrive ww: Pan Max Speed Pan-tiltMaxSpe
LUMiO 12x User Guide VISCA protocol command list Table 12 VISCA pan/tilt absolute position values Pan Angle VISCA Value Tilt Angle VISCA Value -170 0xF670 -30 0xFE50 -135 0xF868 0 0x0000 -90 0xFAF0 30 0x01B0 -45 0xFD78 60 0x0360 0 0x0000 90 0x510 45 0x0288 90 0x0510 135 0x0798 170 0x0990 Table 13 VISCA pan/tilt speed values Setting value Pan (degree/second) Setting value Tilt (degree/second) 0 0.3 0 0.3 1 1 1 1 2 1.5 2 1.5 3 2.2 3 2.2 4 2.4 4 3.6 5 2.
LUMiO 12x User Guide VISCA protocol command list Setting value Pan (degree/second) Setting value Tilt (degree/second) 12 6 12 23 13 9 13 30 14 15 14 39 15 19 15 48 16 25 16 59 17 32 17 69 18 38 18 80 19 45 20 58 21 75 22 88 23 105 24 120 Table 14 VISCA exposure values Value Shutter speed (in seconds) Value Iris Value Gain 21 1/10000 0 close 0 0dB 20 1/6000 1 f32 1 2dB 19 1/4000 2 f28 2 4dB 18 1/3000 3 f24 3 6dB 17 1/2000 4 f22 4 8d
LUMiO 12x User Guide VISCA protocol command list Value Shutter speed (in seconds) Value Iris Value Gain 13 1/500 8 f9.6 8 16dB 12 1/350 9 f6.8 9 18dB 11 1/250 10 f5.6 10 20dB 10 1/180 11 f4.8 11 22dB 9 1/125 12 f4.0 12 24dB 8 1/100 13 f3.4 13 26dB 7 1/90 14 f2.8 14 28dB 6 1/60 15 f2.4 5 1/30 16 f2.0 4 1/15 17 f1.8 3 1/8 2 / 1 / 0 / Table 15 VISCA zoom values Zoom level Value x1(wide) 0x0 x1.2 0x8D0 x1.
LUMiO 12x User Guide VISCA protocol command list Zoom level Value x6.9 0x37A4 x8.2 0x3A98 x9.9 0x3D8C x11.
LUMiO 12x User Guide PELCO-D protocol command list PELCO-D protocol command list You can communicate with your LUMiO 12x using the following PELCO-P protocol commands.
LUMiO 12x User Guide Function Query Zoom Position Response PELCO-D protocol command list Byte1 Byte2 Byte3 0xFF Address 0x00 Byte4 0x5D Byte5 Byte6 Value High Value Low Byte Byte Byte7 SUM 57
LUMiO 12x User Guide PELCO-P protocol command list PELCO-P protocol command list You can communicate with your LUMiO 12x using the following PELCO-P protocol commands.
LUMiO 12x User Guide Function Query Zoom Position Response PELCO-P protocol command list Byte1 Byte2 Byte3 0xA0 Address 0x00 Byte4 0x5D Byte5 Byte6 Value High Value Low Byte Byte Byte7 Byte8 0xAF XOR 59
LUMiO 12x User Guide Support Support This section includes supplementary information that helps support your technical understanding of your LUMiO 12x and includes instructions on contacting Epiphan's support team.
LUMiO 12x User Guide Customer support Customer support Epiphan provides a complimentary one-year support plan with your purchase (starting one year from the original product shipment date) as well as an extended support plan, called "SupportPlan". This extended plan adds two more years to extend the support to three years from original product shipment date. To contact Epiphan support: l Email: support@epiphan.com l Online chat: www.epiphan.
Software and documentation license ATTENTION: THE SOFTWARE AND DOCUMENTATION PROVIDED UNDER THIS AGREEMENT ARE BEING LICENSED TO YOU BY EPIPHAN SYSTEMS INC. (“LICENSOR”) AND ARE NOT BEING SOLD. THIS AGREEMENT CONTAINS LIMITATIONS ON REPRESENTATIONS, WARRANTIES, CONDITIONS, REMEDIES, AND LIABILITIES THAT ARE APPLICABLE TO THE SOFTWARE AND DOCUMENTATION. Epiphan Systems Inc.
3. Open Source Software: Binary, bytecode and source code versions of certain open source software packages may be embedded in or distributed with the Software (“Open Source Software”). If a separate license agreement for an item of open source software is: delivered to You with the Software; included in the download package for the Software; referenced in any material (including the Documentation) that is included in the download or distribution package for the Software; or listed at www.epiphan.
6.
enhancements to the Software provided pursuant to any technical support You may procure from Licensor shall be governed by the terms and conditions of this Agreement. Licensor reserves the right at any time not to release or to discontinue the release of any Software and to alter prices, features, specifications, capabilities, functions, licensing terms, release dates, general availability or other characteristics of the Software. 9.
otherwise provide to any third party any portion of the Software, except as expressly permitted in this Agreement. 14. General: This Agreement is the entire agreement between You and Licensor in respect to the Software, superseding any other agreements or discussions, oral or written.
ATTENTION, RISQUE DE CHOC ÉLECTRIQUE: Cet appareil peut être équipé de multiples cordons d'alimentation en courant alternatif. Pour placer cet appareil hors tension, débrancher tous les cordons d'alimentation sans exception. FCC & CE Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2.
In no event shall any reference to any third party or third party product or service be construed as an approval or endorsement by Epiphan of that third party or of any product or service provided by a third party. Miscellaneous It is the user's responsibility to ascertain whether any information downloaded from the Epiphan web site or other websites is free of viruses, worms, trojan horses, or other items of a potentially destructive nature.