User Manual

DVI2USB 3.0 User Guide Quick start
5. For Windows:
a. Right-click on the .zip file and choose Extract All (the files must be extracted before
proceeding).
b. Open the extracted files folder.
c. Right-click on setup.exe and select Run as administrator to start the installation.
d. Follow the prompts to install the drivers (the Epiphan Capture Tool is also installed).
Installation may fail for computers inheriting security permissions from a Windows
domain, even when the installer is run as administrator. In that case, contact your
local IT team for assistance with installation.
6. For Mac:
a. Save your work and exit all other applications. (Note: the workstation will reboot after the driver
installation).
b. If not automatically unpacked to a .pkg file, double-click the .dmg file to unpack it.
c. Double-click the .pkg file to begin the installation.
d. Follow the prompts to install the drivers(the Epiphan CaptureTool is also installed).
e. Enter the admin password, if requested.
f. The workstation needs to be restarted and is ready after restart.
Connect the video grabber and the video source:
Now that the drivers are installed, you're ready to begin capturing! Although the steps below ask you to
connect the video source to the grabber, then the grabber to the workstation, you can connect the video
source and video grabber in any order.
1. Connect the video source to the DVI-I port on the video grabber. (If necessary, use an adapter or
appropriate converter cable.)
8