User Manual

DVI2USB 3.0 User Guide Set VGAmodes
Set VGAmodes
The VGA Modes page lets you configure the VGAmodes used for analog video capture.
On Windows, you can access this screen by selecting Capture » Configure Video » VGA Modes or using the
Epiphan applet in the ControlPanel by selecting the video grabber you'd like to configure and clicking
Configure Device or Default Configuration.
On Mac, you can access this screen by selecting View » Show Adjustment Controls » VGA Modes , or by
selecting Edit for the video grabber in the Capture tab of the Epiphan system preferences application.
The video grabber supports many common VGAmodes out of the box. If however you wish to capture from a
custom VGA source (i.e. custom resolution or timing) you can add that here. You can also uncheck any
VGAmodes you'd prefer the video grabber doesn't try to use when tuning the capture parameters for your
source.
To add a custom VGAvideo mode:
1. Launch the EpiphanCaptureTool.
2. Windows:Select the Capture » Configure Video menu item; the configure dialog appears.
3. Mac:Select the View » Show Adjustment Controls menu item; the adjustments dialog appears.
4. Select the VGAModes tab.
5. Click the plus button to add a custom mode; the custom mode dialog opens.
28