User Manual

DVI2USB 3.0 User Guide Record a video
5. When you are done capturing, use the pause (Windows only) or stop buttons to pause or stop
recording. (You can also use the keyboard shortcut Ctrl-U for pause and can use the menu items
Capture » Pause or Capture » StopRecording on Windows or File » Stop Recording onMac to
control recording.)
6. Use your operating system's file browser (Windows Explorer or Finder) to find your saved capture file.
On Windows, if the status bar is visible, the filename and path of the last saved file is found in the
status bar at the bottom of the EpiphanCaptureTool. On Mac, the file path is found in the VGA2USB »
Preferences dialog under the Recording tab.
Windows Only: If you're having trouble capturing embedded audio, make sure you have the
video grabber connected to a USB 3.0 port. Due to the extra volume of data that needs to be
captured, embedded audio capture is only supported when connected via USB3.0.
HDMIaudio capture may fail if your device has an old or incorrect EDID loaded. See Update
device EDID.
On Windows, when video file reaches the AVI file size limit one of the following occurs based on recording
configuration settings:
l recording stops;
l recording continues and a new video file is created; or
l recording continues and the original video file is overwritten.
To set recording options refer to Configure optional recording settings.
62