User Manual
DVI2USB 3.0 User Guide Record as a series of images
As images/frames are captured by the video grabber they are saved as individual image files. While capturing,
the status bar displays the name and location of the last saved image. The total number of images saved is
displayed when recording stops.
To record your images:
1. The Epiphan Capture Tool should already be capturing and previewing your video source (if you see a
No Signal message, disconnect and reconnect the cables to make sure they are all seated correctly).
2. Select Capture »Start Recording, use the red record button or keyboard shortcut Ctrl-R to start
recording; the Save dialog opens.
3. When you are done capturing, use the pause or stop buttons to pause or stop recording. (You can also
use the keyboard shortcut Ctrl-U for pause and can use the menu items Capture » Pause or Capture
» StopRecording to control recording.)
77