User Manual

DVI2USB 3.0 User Guide Configure audio
a. If capturing embedded HDMI audio, select Frame Grabber.
b. If using an external audio source, click Specific Windows audio input device and select your
audio device from the list.
c. If desired, use the Audio format drop down to specify the audio bit rate you want saved (or
streamed), Stereo/mono and bit-depth. (If this value is different than the incoming audio bitrate,
DVI2USB 3.0 resamples the audio to your specified bitrate.)
d. If desired, check the Play captured audio checkbox to have the audio played over the capture
workstation's audio output device (e.g. speakers or headphones connected to the capture
workstation).
e. Click OK or Apply.
6. Alternatively, select Capture » Audio Input Device and select your audio source from the list.
79