User Manual
DVI2USB 3.0 User Guide Command line options
6. Change the Font type and size by clicking the elipsis (...) next to the Font description; a font selection
dialog opens.
7. When you are done configuring, click Apply to see the changes while keeping the dialog open for futher
tweaks, or clickOK to apply your changes and close the dialog.
You can have both a text watermark and a timestamp mark on your captured video or images. Give them
both a try to see what you like best.
Tip:You can use a custom font generator to generate a font that has a monotone version of your
company logo or other graphic to overlay as "text" on the image.Using this trick, it will appear like you
have a graphical watermark.
Command line options
On Windows, you can use command line options to control how the EpiphanCapture Tool starts up. Add as
many command line options as needed, in any order. Each command line option starts with two dashes is
separated from other options with a space.
The following command line options are supported:
Option Description
--borderless
Start the capture application in image only mode. Press the Escape key
to exit from image only mode.
--sn <serial number>
Specify which video grabber to use(when more than one is connected
to the video capture workstation). <serial number> is the serial number
of the desired video grabber.
--hs <value> Set the horizontal shift value.*
--vs <value> Set the vertical shift value.*
--phase <value> Set the sampling phase value.* Range is 0 to 31.
--pll Set the PLLadjustment.*
--offset <value> Set the offset(brightness).* Range is 0 to 63.
--gain <value> Set the gain(contrast).* Range is 0 to 63.
--topmost
Keep the capture application window as the topmost window on your
screen.
85