EPESP0909 User's Guide
Table Of Contents
- Thank you for choosing Epiphan Video!
- Firmware 3.1.0 release notes
- About AV.io HD
- Registering your AV.io HD
- Table of contents
- Quickstart
- Getting started
- Hardware
- Capture
- Configuration options
- Limitations and known issues
- Troubleshooting
- Releases and features
- Software and documentation license
AV.io HD User Guide Linux
5. Click Open.
6. AV.io Config starts! If you video grabber is connected to the computer by USB, it is detected.
Linux
1. Download the AV.io Config package under the Linux heading on the AV.io HD Downloads page on
Epiphan’s web site.
http://www.epiphan.com/support/avio-hd-drivers-documentation/
2. Untar and unzip the contents of the .tar.bz2 file (tar -xjvf can be used to untar and unzip in one
command).
3. Browse (or change directories) to the unzip folder.
4. Either: Double-click the AV.io Config application icon or execute the AV.io Config application from the
command line to launch AV.io Config (./AVioConfig).
5. AV.io Config starts! If you video grabber is connected to the computer by USB, it is detected.
20