EPESP0909 User's Guide

AV.io HD User Guide Update firmware using the AV.io Config tool
Do not disconnect your AV.io HD at any point during the update process! Doing so may cause
irrevocable errors and/or permanently damage the device.
9. When the update is finished the progress bar turns green and displays “Update Completed” (Note the
firmware update will not be automatically reflected in the Devices list unless the Refresh icon is
clicked). You may now safely disconnect your AV.io HD if needed.
When updating firmware on a Mac, the “Update Completed” text will not be displayed. The
firmware upgrade is complete when the progress bar fills the width of the AV.io Config window
and the window contents are no longer greyed out.
27