User Manual

AV.io HD User Guide Configure settings using AV.io Config tool

Configure settings using AV.io Config tool

Epiphan’s AV.io Config tool allows a more advanced user the ability to change several settings to their video

capture experience. The settings that can be changed include: Re-numerate input signal resolution, aspect

ratio preservation and performance mode.

To change the configurable settings with the AV.io Config tool:

1. Connect your AV.io HD device to your computer, laptop or notebook.

2. Download the AV.io Config tool from the AV.io Drivers section of Epiphan’s web site (if you haven’t

already done so).

http://www.epiphan.com/support/avio-hd-drivers-documentation/

3. Open the AV.io Config tool.

4. Select your AV.io HD device from the list under the Devices heading.

If your AV.io HD device is not displayed, press the Refresh icon to refresh the list of connected

devices.