User Manual

AV.io HD User Guide Update firmware using the AV.io Config tool

If your AV.io HD device is not displayed, press the Refresh icon to refresh the list of connected

devices.

6. Click the Firmware tab.

7. Click the folder icon to navigate to the saved location of the firmware, and click Update to update

your AV.io HD device to the selected firmware. An update bar will appear which will display the progress

of the update.

Do not disconnect your AV.io HD at any point during the update process! Doing so may cause

irrevocable errors and/or permanently damage the device.

8. When the update is finished the progress bar will turn green and display “Update Completed”. You may

now safely disconnect your AV.io HD if needed.