User Manual

Pearl-2 User Guide Verify IP address and MAC address of Pearl-2
Verify IP address and MAC address of Pearl-2
There are two ways to view the current IPaddress and MAC address of your Pearl-2:
l From the Network configuration page using the Admin panel.
l From the Settings menu using the touch screen on Pearl-2.
Table 18 Network Information
Item Description/Options
MACAddress
A media access control address (MAC address) is a unique identifier for the
network interface. The value is read-only and cannot be changed. You may need
to share this value with your system administrator.
Current IPAddress
Reflects the current internet protocol address (IP address) of the system. This
value is either obtained from the DHCP server (if using DHCP) or is the configured
static IP address. Pearl-2 supports IPv4 addresses. It does not support IPv6
addresses.
To view network information using the Admin panel:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, click Network. The network configuration page opens.
To view network information using the touch screen:
1. Tap the gear icon to open the System settings screen. If the control icons aren't showing, tap anywhere
on the touch screen.
94