User Manual

Pearl-2 User Guide Disable or enable audio and output port volume
Disable or enable audio and output port volume
If you're displaying a channel as the source for your video output port, audio for that channel is also encoded
and sent over the port by default. You can disable the audio on the output port using the Admin panel. You
can also adjust the volume of the audio on the video output port using the Admin panel.
Audio pass-through, adjusting the volume, and displaying an audio meter are only supported
when a channel is the selected video source.
To disable the audio for a channel on the video output port and adjust the volume using the Admin panel:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Outputs menu, click the output port (HDMI 1 or HDMI 2). The video output port
configuration page opens.
3. Check Enable audio if you want audio on the video output port. Uncheck Enable audio if you don't
want audio on the output port.
127