User Manual

Pearl-2 User Guide Connect an RTSP source
To connect an RTSP source to Pearl-2:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Inputs menu, click Add RTSP source. The RTSP input page opens.
3. Enter the Input URL, Username and Password for your RTSP source and select either UDP or TCP as
the Preferred transport. If you're using another Pearl-2 as an RTSP source, see Stream content using
HTTP, HTTPS or RTSP.
4. (Optional) Rename the RTSP source, see Rename an input port.
5. (Optional) Configure a custom "No signal" image, see Add a custom No Signal image .
6. Click Apply to save your settings and connect your RTSP source.
After your RTSP source is connected, you can view basic video and audio signal information and packet loss
statistics for the source under the Status header at the top of the page. Any warnings or errors associated
with your RTSP stream are also displayed on this page.
277