User Manual
Pearl-2 User Guide Change HTTP and RTSP streaming port values
For RTSP streaming directly to users on your LAN, the only information that's needed to view the broadcast is
the URL and the RTSP port number used to stream the broadcast.
HTTP port numbers are used for FLV andMPEG-TS streaming methods.
To set the HTTP and RTSP streaming ports for streaming to viewers on the local network:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Channels menu, select a channel and click Streaming. The Streaming page opens.
3. Set the HTTP Streaming port to specify the port used to stream the HTTP broadcast. This value along
with the URL is used by viewers to access the FLV and MPEG-TS streams.
The port number must be higher than 500 for HTTP. In the case of RTSP streaming this
value is ignored.
4. Set the RTSP Streaming port to specify which port to use when you are streaming live video via RTSP.
This value along with the URL is used by viewers to access the broadcast. The default for channel one is
554.
5. Click Apply.
307