User Manual
Pearl-2 User Guide
unsure, restoring to factory default is the best approach.
To restore the default EDID:.
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Inputs menu, selectthe source you want to restore. The source configuration page opens.
3. Scroll to the EDIDsection and click restore.
4. When the default EDID is applied, the page updates to reflect success or failure.
Unstretch the output video
Pearl-2 preserves the aspect ratio of your input video signal by default when you add the source to a layout
using the custom layout editor. If you've changed the default setting, the image is stretched to match the
output frame size.
To prevent the image from looking stretched, you can use the custom layout editor to preserve the video
source's aspect ratio.
Unstretching the image causes a matte (black bars)to appear on the sides or top and bottom of
the output. To remove these see Remove black bars (matte) from the video.
To preserve the video source's aspect ratio:
1. Connect to the Admin panel and login as admin. See Connect to the Admin panel.
2. From the Channels menu, select a channel and click Layouts. The custom layout editor page opens.
458