Manualshelf

User Manual

ManualsBrandsEpiphan ManualsProduction SwitchersPearl-2 Rackmount Video Production Device
61626364656667686970
Pearl-2 User Guide Configure the touch screen
To hide or show the channel previews on the touch screen:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, click Touch Screen. The touch screen configuration page opens.
3. Uncheck Show preview to disable channel previews from displaying on the touch screen. Check Show
preview if you want to enable channel previews on the touch screen.
4. Click Apply.
Disable or enable the system status screen
The system status screen displays network and system related information, such as the IP address needed to
access Pearl-2. You may not want this information visible on the touch screen after you've configured Pearl-2.
You can use the Admin panel to disable the system status screen from displaying on the touch screen.
To disable or enable the system status screen from displaying on the touch screen:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
56