User Manual

Pearl-2 User Guide Connect using the Epiphan discovery utility
Connect using the Epiphan discovery utility
Epiphan provides a utility for discovering Epiphan systems on your network. The Epiphan network discovery
utility is a 32-bit Windows executable that works on most 32-bit and 64-bit Windows operating systems.
Download and install the utility via this link: https://www.epiphan.com/downloads/NetworkDiscovery.exe.
To access the Admin panel using the Epiphan discovery utility:
1. Launch the discovery utility.
2. Click Search to find all the Epiphan systems on the network. A list similar to the following appears.
If more than one Pearl-2 appears, select the one you want using the serial number
that's listed.
3. (Optional) Record the IP Address shown in the stream properties for future reference.
4. Click Web config. Your browser opens and points to the Admin panel page, for example: http://<IP
Address of Pearl-2>/admin
5. Enter your user name and password when prompted, then click OK. The administrative user name is
admin. Initially no password is set. To set a password, see User administration.
66