User Manual

Pearl-2 User Guide Manage CA and self-signed certificates
8. Click Apply when you're done.
9. Reboot Pearl-2 when prompted. After the system has finished rebooting, log back in to the Admin
panel as admin and verify that all changes were applied.
If you need to delete the user certificate or private key, click Delete certificate.
Manage CA and self-signed certificates
You can view the list of CA and self-signed certificates that come preloaded on Pearl-2. CA and self-signed
certificates are used for server authentication if Verify server's identity is selected when 802.1x network
security is configured, see Configure 802.1x network security and manage user certificates.
You can add more CA signed and self-signed certificates using the Admin panel, as well as delete any
certificates that you've uploaded. You cannot delete any of the built-in CA certificates that came preloaded on
Pearl-2.
To manage CA and self-signed certificates on Pearl-2 using the Admin panel:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, select Security. The Security configuration page opens.
3. Under CA certificates, click the arrow head to expand the list of built-in CA and self-signed certificates
that came preloaded on Pearl-2.
4. To upload a new CA or self-signed certificate, click Choose File and select the certificate you want to
upload. Then click Apply. The uploaded certificate is added to a list of user uploaded CA certificates.
105