User Manual

Pearl-2 User Guide Show a channel or video source on the output port

1. Login to the Admin panel as admin, see Connect to the Admin panel.

2. From the Outputs menu, click the output port (HDMI 1 or HDMI 2). The video output port

configuration page opens.

3. In the Source field, select a channel (prefixed by the word Channel) or a video source (prefixed by the

word Input).

4. In the Resolution field, select the resolution for the video output port.

Value Description

Same as source

Set the output to the same resolution as the channel or

video source. If that resolution is not supported by the

display, the video output port will negotiate a new

resolution with the display (generally this ends up being the

display's default resolution).

Destination default

This is the default value. Each display has a preferred

resolution, and when you choose this setting, the video

output port will use the display's default resolution.

640×360, 640×480, 960×540,

1024×768, 1280×720, 1280×960,

1360×768, 1400×1050, 1920×1080,

1920×1200, 2560×1440,

3840×2160

, 4096×2160

Choose a specific resolution for the output port. For an

explanation of the different choices, see Show a channel or

video source on the output port.

124