User Manual

Pearl-2 User Guide Display and reposition the audio VUmeter
4. When audio is enabled, the Audio volume field appears. To adjust the volume, enter a value between
0 and 100.
5. Click Apply.
You can also disable or enable audio on the video output port and adjust the volume using
Epiphan Live, see Monitor and setup the output port source and audio.
Display and reposition the audio VUmeter
When sending a channel with audio over the video output port, you can choose whether or not to display the
audio VU meter using the Admin panel. You can also determine the position and orientation of the audio
meter.
Audio pass-through, adjusting the volume, and displaying an audio meter are only supported
when a channel is the selected video source.
To configure the audio meter for the video output port:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
128