User Manual
Pearl-2 User Guide Apply a configuration preset using the touch screen
You can verify which configuration groups are included in a preset by looking at the list to the right of the
configuration preset name. The term 'all' means all groups are included. Otherwise groups are listed
individually.
You may apply multiple presets one after another. If you apply two (or more) configuration
presets that include a particular configuration group, the settings (for that group) from the last
applied preset are the active settings. In short, last in wins.
To apply a configuration preset using the Admin panel:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, click Maintenance. The maintenance page opens.
3. In the Configuration presets section, click the Apply button next to the configuration preset you
want to apply. ClickOK when prompted. Pearl-2 reboots automatically if the configuration preset
includes the network or system configuration groups.
Apply a configuration preset using the touch screen
You can use Pearl-2's touch screen to apply configuration presets. If you apply a preset that has the EDID
configuration group, the system may appear unresponsive for a short time while it applies these EDIDs to the
video grabbers.
155