User Manual

Pearl-2 User Guide Front and back view Pearl-2
Label Name Description
RJ-45 Ethernet
Auto-sensing gigabit Ethernet 10/100/1000 Base-T network port. See
Configure network settings for setup instructions.
Power jack Plug the supplied 120/240 V AC power cable in here.
1
Requires 4K feature add on
The SDI ports on the back of Pearl-2 can be delicate. Be careful to avoid sharp impacts or pressure
such as balancing the system on its back with the SDI ports against a hard surface. Rough
treatment of the SDI ports could result in loss of functionality for that port.

6