User Manual
Pearl-2 User Guide Configure auto channels
Configure auto channels
Auto channels are included with Pearl-2 to make setup quick and simple. However if you want to set custom
encoding or streaming configuration for the channel, you can configure it like any other channel.
To further configure automatic channels Auto A and Auto B:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
3. Fromthe Channels menu, click Auto A or Auto B. The channel's status page opens
4. Configure the automatic channel as you would any other channel.
To change the video source for the two auto channels, just select a different video source using
the custom layout editor, see Add video sources or a channel as a source. The channel name
automatically changes to the name of the selected video source if there's only one source in that
channel. For important information about changing the channel name, see Rename a channel.
Create a channel
You create channels on Pearl-2 using the Admin panel. New channels automatically use the same aspect ratio
as the default frame size setting for the channel, which is 16:9. You can change the encoding settings for a
channel after the channel is created.
197