User Manual

Pearl-2 User Guide Stream content using HLS(HTTP/HTTPS)
Access Method URLFormat
rtsp://<IP Address>:<port>/stream.sdp
Where IP address is the IPaddress of the system, the port number for the
channel is found on the Info page, and the channel number is provided from the
Admin panel.
To retrieve the stream URLfor your viewers:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Channel menu, select a channel and click Status. The Status page appears.
3. Record the Live broadcast, RTSP stream URL or other web streaming address. This is the address
you can send to viewers or use to create a link to your broadcast.
If you're seeing URLs with serial numbers instead of IPaddresses and want to change this, log into
the Admin panel by IP address (instead of by Serial number/Bonjour Print Services) to see
URLswith the IPaddress, see Connect to the Admin panel.
Stream content using HLS(HTTP/HTTPS)
Stream live over the standard HTTPport 80 for access through firewalls and proxies that are normally
accessible to other HTTPtraffic. If HTTPS is configured for Pearl-2, the traffic from port 80 is redirected to
HTTPS port 443.
HLSis supported with the H.264 codec and MP3 or AAC audio encoding. When streaming using HLS, there is
approximately a 30 second delay.
1. Login to the Admin panel as admin, see Connect to the Admin panel.
295