User Manual
Pearl-2 User Guide MPEG-TS streams using UDP push
in cases where folders are not displayed, use dot separator hierarchy to help your viewers filter
out unwanted streams by category.
7. Click Apply.
8. Click the Info menu option of the Admin panel. An Info page opens displaying stream information.
To view the stream from a media player, open the URL in a media player, for example:
rtp://@ip:port or in the case of the sample configuration in the figure shown above:
rtp://@226.10.24.32:7000
To view the stream when SAP announce has been set and the stream is advertised on a media player, set-top-
box or Smart TV, refer to Viewing with Session Announcement Protocol (SAP).
MPEG-TS streams using UDP push
Before configuring your channel for MPEG-TS streaming, ensure the following codecs are configured in the
encoding section:
l Video – H.264
l Audio – MP3 or AAC, if audio is configured.
To configure MPEG-TS withUDPpush:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
3. From the Channels menu, select a channel and click Streaming. The Streaming configuration page
opens.
4. Click New stream and select MPEG-TS UDP push.
325