User Manual

Pearl-2 User Guide Manually copy recordings to USB storage device
3. Select used for one-time move/copy of the recorded files (upon insertion).
If a conflict is reported regarding the Automatic file upload settings, click Fix it or go to the
Automatic File Upload configuration page and either disable automatic file upload or switch
to a non-USB based upload type.
4. Check the options you want to use for the one-time move/copy file transfer and click Apply.
5. Insert the USB storage device into one of the USB ports. File transfer starts automatically.
6. Follow the steps to Safely eject USBstorage device when the activity light on the USB storage device
stops flashing. If your USB device doesn't have activity indicators:
a. Check the Recording list for each channel and the Recorded Files list for each recorder to
verify if there are files that have yet to be copied.
b. Safely eject USBstorage device when you are satisfied all files have been copied, or if you notice
the USB storage device is out of space, see View available USBstorage space.
Manually copy recordings to USB storage device
You can manually copy recorder files to a USB drive connected to Pearl-2.
This procedure is separate from automatic file upload and does not need any pre-configuration in the
automatic file upload page.
To manually copy recorded files to a USB device:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, select External USB Drive link. The External USB Drive configuration
page opens.
3. Select used to manually move/copy selected files via the Admin panel and click Apply.
395