User Manual
Pearl-2 User Guide Controlling Pearl-2 using HTTP/HTTPScommands
For recorders, add 'm' before the recorder number (i.e. channelm1 for recorder 1), for example:
http://<address>/admin/channelm<N>/get_params.cgi?key
Sample Set configuration settings:
http://<address>/admin/channel<N>/set_params.cgi?key=value
or
https://<address>/admin/channel<N>/set_params.cgi?key=value
For recorders, add 'm' before the recorder number (i.e. channelm1 for recorder 1), for example:
http://<address>/admin/channelm<N>/set_params.cgi?key
Where <address> is the IP address of the Pearl-2, channel<N> is the channel number (i.e. channel2 for
channel number two), and channelm<N> is for recorders (i.e. channelm2 for recorder two), key is the
configuration key for the item being checked or changed (see Configurationkeys forthirdparty APIs ), and
value is the value to set for the configuration item.
The following examples show how to use wget to exercise some of the supported HTTP/HTTPS commands.
You can substitute https for http in the urls.
For values with spaces, encode space as %20. i.e.: set_params.cgi?framesize=640%20x%20480
The examples assume a system IP address of 192.30.23.45 and admin password is pass123.
To get the type of stream being published and frame size for channel 1:
wget --http-user=admin --http-passwd=pass123 http://192.30.23.45/admin/channel1/get_
params.cgi?publish_type&framesize
To set the publish stream type to RTMPPush(6) and at the title “System Stream” for channel 2:
430