User Manual

Pearl-2 User Guide Configure the touch screen
Disable or enablethe touch screen
You can enable or disable Pearl-2 from displaying anything on the touch screen. The touch screen remains
touch-sensitive even when the display is disabled.
To disable or enable the touch screen display:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, click Touch Screen. The touch screen configuration page opens.
3. Uncheck Enable display to disable the touch screen display. Check Enable display if you want the
touch screen display enabled.
4. Click Apply.
Hide or show channel previews on the touch screen
Previews of your configured channels display on the touch screen of Pearl-2 by default. You can disable
channel previews using the Admin panel.
A message displays on the touch screen when channel previews are disabled. If you have configured system
status or settings and configuration preset changes to be allowed, then tapping anywhere on the touch
screen opens the settings page.
55