User Manual

Pearl-2 User Guide Connect to the Admin panel
1. Get the IP address of Pearl-2. Do one of the following:
a. From a single channel view or grid view, tap the system settings (gears) icon, then tap System
Status, or
b. If your system doesn't have any channels showing, tap the touch screen anywhere to go to the
system settings screen, then tap System Status.
3. When you have the IP address of your Pearl-2, enter the following into the address bar of your web
browser to launch the Admin panel.
http://<IP Address of Pearl-2>/admin
If HTTPS is enabled on Pearl-2, replace http with https in the URL.
4. Enter your user name and password when prompted. The administrative user name is admin. Initially
no password is set so you can leave that blank and click OK.
We recommend setting an admin password for higher security, see User
administration.
If you don't know the IPaddress, you can do one of the following:
For networks with DHCP, you can:
l Connect using a DNS-based service discovery
l Connect using the Epiphan discovery utility
For networks without DHCP, you can:
l Connect using persistent static IP address
65