® OWNER’S MANUAL EA-AMP-12D-70A 12 CHANNEL Multi-Channel, Class D, >> 70 Watt Amplifier EA-AMP-8D-70A 8 CHANNEL
EA-AMP-70 Installation and Users Manual IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture. 1. Read the following instructions carefully. 2. Keep manual for future reference. 3. Heed all warnings. 4. Follow all instructions in this manual. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install according to manufacturer’s instructions. 8.
EA-AMP-70 Installation and Users Manual WELCOME TO EPISODE® Episode® is one of the most highly-regarded brands of audio products available today. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry These Episode® Amplifiers are built on the latest digital technology and deliver efficient, clean power to every room.
EA-AMP-70 Installation and Users Manual EA-AMP-12D-70 1 2 3 4 5 6 7 8 9 10 11 12 REAR PANEL FEATURES (12D and 8D) 1. GLOBAL INPUT Easily amplify outputs from any stereo source across any/all channels 2. LOOP OUT Allows global inputs to be sent to other amplifiers 3. GAIN CONTROL Allows independent gain for each pair of inputs 4. BRIDGED SWITCH Easily couple two channels together for increased power NOTE: 8-ohm minimum when using bridge mode 5.
EA-AMP-70 Installation and Users Manual EA-AMP-8D-70 1 2 3 4 5 6 7 8 9 10 6. INPUT SWITCH Choose between global inputs and individual inputs for each channel 7. SPEAKER OUTPUTS 8. MASTER POWER SWITCH Disables power to the amplifier 9.
EA-AMP-70 Installation and Users Manual POSITIONING YOUR EPISODE AMPLIFIER Episode amplifiers are designed to help deliver a great audio experience that makes your music come alive for years to come. However, where you place the amplifier can have a large effect on the performance that you receive and the life of the unit. · Be sure that the unit is in a well-ventilated area that provides adequate cooling. · Do not block the cooling vents located on both sides of the unit.
EA-AMP-70 Installation and Users Manual VERIFYING PHASE When proper polarity is not maintained, the speakers play at the opposite ‘time’ from each other, or out of phase. The result is audio with lack of bass and vocals that sound thin or distant. If during or after calibrating your receiver you suspect the sound is not right and you cannot see any markings on the wire to verify polarity is correct, try this simple test: 1. Sit in the normal listening position for the system. 2.
EA-AMP-70 Installation and Users Manual INSTALLATION – SETUP AND OPTIONS INPUT SELECTION CAUTION: Only change switch positions when the amplifier is turned off.Each channel is capable of delivering the sources from a dedicated Line-In or the Global-Inputs by changing the Line-In/ Global In switch. POWER CONNECTION Plug the supplied power cord into the amplifier and to a polarized wall outlet or appropriate surge protector.
EA-AMP-70 Installation and Users Manual EPISODE® MULTI-ROOM INSTALLATION RECEIVER OUTPUT L R ROOM 1 DVD INPUT L R AUX INPUT L R CD INPUT ROOM 2 GLOBAL A OUTPUT L R pg.
EA-AMP-70 Installation and Users Manual EPISODE® MULTI-ZONE INSTALLATION CD PLAYER DVD PLAYER OUTPUT L R OUTPUT L R ZONE 1 OUTPUT L R ZONE 2 ZONE 2 OUTPUT L R ZONE 3 IPOD OUTPUT L R CD INPUT ZONE 1 TUNER DVD INPUT ZONE 3 OUTPUT L R OUTPUT L R TUNER INPUT ZONE 4 OUTPUT L ZONE 4 R AUDIO MATRIX SWITCHER AUX INPUT ZONE 5 OUTPUT L R ZONE 5 ZONE 6 OUTPUT L R ZONE 6 pg.
EA-AMP-70 Installation and Users Manual EPISODE® HOME THEATER/MULTI-ROOM INSTALLATION HOME THEATER RECEIVER SPEAKER OUTPUTS LEFT ROOM 1 pg.
EA-AMP-70 Installation and Users Manual TROUBLESHOOTING No audio from any channel. •Power cable to the amplifier is incorrectly connected or plugged into an outlet that does not have power. Check connections and verify power on the outlet. •Audio cable to the source component is not connected properly, connected to incorrect BUS input or the cable is defective. Check connections or replace cable with one that has been verified as good. •The Input Selection switches are set incorrectly.
EA-AMP-70 Installation and Users Manual SPECIFICATIONS Continuous Power Output All channels driven 50 watts RMS at 8 ohms 70 watts RMS at 4 ohms Bridged Power Output All channels driven 140 Watts per channel RMS at 8 ohms Note: Maintain 8 ohm minimum when using bridge mode Input Sensitivity 500mV Input Impedance 20,000 ohms S/N ratio 95 dB Frequency Response 20 Hz to 20 kHz Distortion (Unbridged) 0.1% THD 20 Hz-20 kHz Distortion (Bridged) 0.
® 130213-1420 © 2013 Episode