EPISODE LX / LXP WHIRLPOOL PEDICURE SPA User’s Manual Please read user’s Manual thoroughly before using pedicure spa Pedicure Spa Copyright 2010 by J&A USA Inc.
Table of Contents Table of Contents Introduction & Safety Identify Parts & Description Consideration Specification Dimension Drainage Connection EPISODE Installation Summary Safety and Maintenance ( Dura-Jet) Safety and Maintenance (Magnetic - Jet ) How to use Magnetic Jet Discharge Pump Chair / Backrest attachment Remote Control Function Disinfecting Pedicure spa User Recommendations UL Certificate Back Flow Prevention Device (Dual Check valve) Limited Warranty LX
Introduction Thank you for choosing EPISODE LX series , This finest Whirlpool Pedicure Spa has been develop and Manufactured by J&A USA Inc., to bring quality and exquisitely balanced design yet afford-ability and dependability when properly use. Please read this entire manual thoroughly before installation and use PLEASE TAKE TIME TO READ THIS MANUAL THOROUGHLY BEFORE USE.
EPISODE LX Identification Head Rest Pillow Backrest Remote control (insert into arm) Up/Down Armrest Arm Tray Adjustable footrest Drain Knob Faucet Product Logo Basin Accentuate Spa Base J&A USA Drain Plug Standard Pipless Motor (D3) Jet cover Adjustable Footrest Optional Pipeless Motor (MG)
Auto Fill System (As an optional Only available on Episode LX) Features & Operation a. b. c. d. e. f. g. h. I. j. k.
EPISODE LXP Identification Head Rest Pillow Backrest Remote control (insert into arm) Up/Down Armrest Arm Tray Faucet Adjustable footrest Serial Number location Ja03______________ Drain Knob Product Logo Basin Accentuate Spa Base J&A USA Drain Plug Standard Pipless Motor (D3) Jet cover Adjustable Footrest Optional Pipeless Motor (MG)
Important Considerations Electrical Service 110V, 60Hz, 15Amp GFCI protected grounded circuit MUST be used to supply power each individual pedicure spa. And the main circuit breaker MUST be at 25Amp. For maximum of two units per each electrical outlet. Water Supply All plumbing connections must conform to local codes. Water supply to the spa should be provided with adequate water pressure and water temperature. Water pressure To fill the basin correctly up to level, Normal water pressure of 30 to 80 P.S.
EPISODE LX / LXP Specification Specification Dimension & Weight (Shipping) Pedicure Spa & Massage Chair Stool 67L x 37W x 40H 20.25L x 8.5H x 20W 242 lbs 19 lbs Dimension & Weight (Net) Pedicure Spa & Massage Chair 57 3/4”L x 28”W x 56”H 182 lbs. Capacity of Tub Episode LX 4.5 U.S Gallon Switch On / Off Air Activated Switch Power Source Plumbing Source Warranty Dedicated 15Amp Wall Outlet Require Pipe - less whirlpool motor Discharge Pump (Optional) Massage System 120Vac, 0.4 Amp.
Arm to Arm 28 1/4” EPISODE LX / LXP Dimension Open Tray 8 ½” 21 1/4” 23 ½” 15” 2 3/4” 26 1/4” 12” 13 1/8” 28” 2” Wall 43 ½” 16” 12 ½” 15 ½” 57 3/4” 16 ½”
Installation Specifications Summary Warning: Failure to comply with federal, state or local codes and ordinances will result in warranty being null and void. As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and licensed electrician MUST complete the applicable connections of the pedicure spa. Location and support Select a level location. The floor structure beneath the pedicure spa must be capable of supporting the occupied pedicure spa.
EPISODE LX DRAIN Back Flow Prevention Device (Dual Check Valve) Specification Device Name Dual Check Valve Backflow Preventor Device MFG WATTS Regulator Company / North Andover, MA Device Model WATTS 3/8 7, 7C and 3/4 H7, H7C ANSI/ASSE Standard 1024 & 1032, CSA Certified NO.B64.6 Device Spec. Device Pressure Max, minimum pressure 150 psi. - 10 psi, Recommended Flow 10 gpm 33F - 144F Consistent; Intermittent to 180F Device Temp. All J&A USA Inc.
Dura-Jet III Safety Instructions When using electrical equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and follow all instructions before using the equipment. 2. Keep the cord out of heavy traffic area. To avoid fire hazard NEVER put the cord under the rugs, near heat generating devices. 3. Always turn off the equipment before servicing. 4. Do not drop or insert any object into any openings.
When using electrical equipment, Basic safety precautions must be followed to reduce the risk of fire, electrical shock, and injury to Persons. 1. Read and follow all instructions before using the equipment. 2. Keep electrical cord out of heavy traffic area. To avoid fire hazard NEVER place electrical cord under the rug, near heat Generating devices. 3. Always turn power off the equipment before service. 4. Do not drop or insert any object into any openings. 5.
How to USE Magnetic jet ! WARNING: DO NOT RUN DRY, BASIN MUST FILLED WITH WATER TO LEVEL INDICATOR. CAUTION: MAGNETIC JET COVER ASSEMBLY MUST ALIGN WITH DISCHARGE PORT POSITIONED AT 3/9 O’CLOCK. WHEN READY TO USE, MAKE SURE JET COVER IS POSITIONED AT 3 /9 OCLOCK FOR PROPER WHIRLPOOL ACTION IN THE BASIN. IF JET COVER IS NOT ALIGN AT 3/9 O’CLOCK, WATER WILL SPLASH OUTSIDE OF THE BASIN. PROPER WAY TO USE MAGNETIC JET SYSTEM 1- FILL THE WATER TO WATER LEVEL INDICATOR.
EPISODE LX Discharge Pump Max. Drainage height : 4ft. ½” Discharge Outlet. DRAIN OUTLET MUST BE ½” or 3/4” FOR EFFICIENT DRAINAGE. ½”X ½” Brass Check Valve 1” PCV Pipe PLUMBER MUST BE UTILIZED TO INSTALL CHECK VALVE and Utility Valves for Hot / Cold Water Fastner On/Off Switch Installation Instruction 3. 4. 5. 6. 7. ** Please cut to fit 1” Flex hose to your size** Pipeless Motor Power Plug PART TIME 2. Make a hole ( size 1-3/8”) for the On/Off switch as shown (see fig 1). Predrill required.
Recliner Piston End Attachment Instruction Recliner Piston Located WRONG PIN POSITION CORRECT PIN POSITION Recliner Piston Pin Recliner Piston Pin BOTTOM OF BRACKET BOTTOM OF BRACKET Locking Latch Locking Latch A. PLEASE MAKE SURE PIN LOCATED AT THE END OF RECLINER PISTON IS IN HORIZONTAL POSITION. B. SLOWLY BRING UP THE BACKREST TO UP RIGHT POSITION UNTIL YOU HEAR “CLICKING” SOUND TO ENSURE PROPER PIN ENGAGEMENT INTO LOCKING LATCH.
EPISODE LX Remote Control Functions POWER INCLINE On / Off Press down to move chair To desirable angle. BACKWARD FORWARD Press to hold to move chair to desirable position Press to hold to move chair to desirable position RECLINE Press down to move chair To desirable angle. AUTO AUTO AUTO Pre-Programed Automatic Massage with 2 Selection POSITION User’s Height (HIGH / MID / LOW) DN UP WHEEL Adjust Massage Wheels Up and Down to desirable position.
DISINFECTING YOUR PEDICURE SPA Note: Please be advised that it is responsibility of purchaser/user to adhere strictly to the following procedure. Any non-compliance will be considered negligence of the purchaser/user. The Bureau of barbering and cosmetology requires that salons using whirlpool pedicure spas use the following disinfecting Procedures to ensure proper cleaning and maintenance of the equipment, and to prevent bacterial infection.
USER RECOMMENDATION PLEASE READ THE MANUAL THROUGHLY BEFORE USE TO ENSURE CORRECT OPERATION. THOSE UNDER A DOCTORS CARE OR WHO ARE EXPERIENCING ONE OR MORE OF THE FOLLOWING DONDITIONS SHOULD CONSULT THEIR DOCTOR BEFORE USE. - You are receiving medical treatment or are feeling ill. - Your body shows any cute symptoms. - You have heart disease. - You are pregnant or having a menstrual period. - Your doctor has ordered you to rest. - You have a back disorder resulting from an accident or disease.
Back Flow Prevention Device (Dual Check Valve) May 1,2007 In accordance with applicable Local or State regulations, J&A USA Inc.
J&A USA Inc. Limited Warranty J&A USA Product: Lenox, Episode, Petra, Toepia, Cleo, Pacific J&A Accessories: Tri-Stool, Euro Stool, Galaxy Stool and Cookie stool EPISODE The Original Purchase Receipt is required as a proof of purchase.
