User Manual

Epomaker SK61/GK61 Extended Manual Version 1.3

Software Tutorials

This section will show you how to use your SK61/GK61 for changing colours, macros and binds.

In order for your keyboard to be detected by the software, it needs to be connected with the

given USB-A to USB-C cable that came with the keyboard. Direct USB-C to USB-C connections

will NOT work.

Lighting Section

This section was created for how to adjust the different lighting, create them and add them to

onboard memory. It will also teach you how to upload and download the lighting effects so you

can share them with your friends.

Creating an Lighting (.LE) Files

I am going to show you how to create a lighting file that you can use, share with other users.

You can use these lighting effects on either the onboard memory of your Epomaker, or by using

it in driver mode.

1. Launch the software with the keyboard connected in wired mode. The keyboard must

use the cable given, or a USB-C to USB-A cable. The USB-A connection gives the ability

for the driver to interface and detect the software. You can use a dongle to connect your

keyboard to a USB-C connection on a Mac.

2. Launch the software and select “LE Files”, this is the section for creating lighting files.

We will go back to the “Configuration” Section later when we want to apply the lighting.