User Manual

Epomaker SK61/GK61 Extended Manual Version 1.3

Add Onboard Lighting Effects

We’re going to be adjusting the on-board lighting effects. You can access these effects by using

FN + ] Until you reach the effect you created.

1. Launch the software with the keyboard connected in wired mode. The keyboard must

use the cable given, or a USB-C to USB-A cable. The USB-A connection gives the ability

for the driver to interface and detect the software. You can use a dongle to connect your

keyboard to a USB-C connection on a Mac.

1. When the software is installed, please launch it and press the “Standard Layer”.

2. Press on any of the Lighting effects you would like to change and select the

lighting profile you would like to add.