User's Guide
Table Of Contents
- The ADAPT 560 | ADAPT 563 headset
- Package contents
- Product overview
- Getting started
- Pairing the headset with Bluetooth® devices
- Using the USB cable
- Installing the EPOS Connect software
- Changing Audio settings for the headset – Microsoft® Windows
- Turning the headset on and connecting it
- Turning the headset off
- Adjusting and wearing the headset
- Adjusting the volume
- Adjusting the headset’s microphone volume for softphones
- Muting the microphone
- Using Active Noise Cancellation (ANC)
- Turning TalkThrough on / off
- Making calls using the headset
- Using headset and dongle with Microsoft® Teams / Cortana
- Listening to audio using the headset
- Additional functions
- Maintaining the products and updating the firmware
- If a problem occurs ...
- Specifications
ADAPT 560 | ADAPT 563 Bluetooth
®
headset
Getting started10
Using the headset
!
CAUTION
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing defects.
X Set the volume to a low level before putting on the headset.
X Do not continuously expose yourself to high volumes.
Turning the headset on and connecting it
3x
2s
2x
X Press the Power button for 2 seconds.
The headset turns on. The LED ashes blue shortly.
The headset automatically tries to connect to available
paired Bluetooth devices.
The LED ashes 2 times blue as soon as the headset nds
a device to connect to. The LED turns off.
If the LED ashes red, no paired device has been found.
Turning the headset o
3x
2s
X Press the Power button for 2 seconds.
The LED ashes red 3 times and turns o.
All volume settings are saved automatically when the
headset is turned o.
X Charge the headset (see page 19).
OR
X Store the headset (see page 20).