User's Guide
Table Of Contents
- The ADAPT 360 | ADAPT 360 White headset
- Package contents
- Product overview
- Getting started
- Pairing the headset with Bluetooth® devices
- Installing the EPOS Connect software
- Changing Audio settings for the headset – Microsoft® Windows
- Turning the headset on and connecting it
- Turning the headset off
- Adjusting and wearing the headset
- Adjusting the volume
- Adjusting the headset’s microphone volume for softphones
- Muting the microphone
- Using Active Noise Cancellation (ANC)
- Turning TalkThrough on / off
- Making calls using the headset
- Using headset and dongle with Microsoft® Teams / Cortana
- Listening to audio using the headset
- Additional functions
- Maintaining the products and updating the firmware
- If a problem occurs ...
- Specifications
ADAPT 360 | ADAPT 360 White Bluetooth
®
headset
Additional functions19
Additional functions
Charging the headset battery
X Connect the supplied USB cable to the USB socket of the headset and a USB socket of your computer.
USB-A
The battery is being charged. The LED lights up depending
on the battery status of the headset and turns off when
the battery is fully charged.
LED Battery status
100% – Battery fully charged
more than 60%
more than 20%
less than 20%
To end charging:
X Disconnect the USB cable from the headset.
i
When the battery is flat, the headset turns off automatically.
Verifying remaining battery power
Some mobile devices indicate the battery status of the
headset.
?
You can retrieve information on the remaining battery
power at any time – except while you are in a call:
X Press both Volume buttons.
The LED ashes shortly and a voice prompt is
announced.
When the battery power drops below 20%,
the LED flashes red and “Recharge headset”
is announced several times.
LED Remaining battery power
more than 60%
more than 20%
less than 20% – automatic voice prompt