User Manual
Table Of Contents
- Important safety information
- Scope of delivery and overview of the DW series
- Product overview of the headsets
- Individually adjusting the headset
- Testing the headset system and the sound quality
- Making calls using the headset
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs
- Specifications
- Manufacturer Declarations
Testing the headset system and the sound quality
DW Series - User Guide | 15
Testing the headset system and the
sound quality
Adjusting the headset system using the DIP switches
1 Press the Link button on the headset to disconnect an existing wireless
link between base station and headset.
The LEDs on the headset and on the base
station go off.
2 Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desi
red position.
Configuring the handset lifter/hook switch –
DIP switches 1 and 2
The DIP switches 1 and 2 are only assi
gned a function on the DW BS,
DW BS ML and DW BS Phone base stations.
1
2
2
1 2 3 4 5 6
DHSG
Handset Lifter
MSH
Short Range
Long Range
Auto Link ON
Auto Link OFF
Narrowband
Wideband
Limiter
Standard
Extra
Settings
Fast Link
Switch position Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and
HSL 10 handset lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.