User Manual

Sharing a workplace
DW Series - User Guide | 33
Using the headset with a third party base station
(DECT-GAP telephone)
왘 Place the headset at a maximum distance of 1 m from the third party
base station.
왘 Simultaneously press and hold t
he headset’s Link button and
Audio button for 5 seconds.
The headset switches to a special pairing mode and the Headset LED
alternately flashes blue/red.
왘 Set the third party base station to a special pairing mode (see the
i
nstruction manual of the third party base station). The default code
for the headset is “0000”.
The heads
et pairs with the third party base station. If pairing is
successful, the Headset LED goes off.
If pairing is not successful within 60 se
conds, the headset switches back
to standby mode.
To pair the headset again with
a DW series base station:
왘 Simultaneously press and hold t
he headset’s Link button and
Audio button for 5 seconds.
The headset switches to a special pairing mode and the Headset LED
alternately flashes blue/red.
왘 Place the headset into the magnetic holder o
f the base station. The
Headset LED flashes 3 times blue and then lights up blue. The base
station and the headset are paired.
5 s
5 s
DW Pro1 – HS
DW Pro2 – HS
DW Office – HS